Tel :+86-13506151306

Home > Product

DHS Conner Tube Gas-Fired Boiler

Capacity: 35-75 t/h

Pressure: 3.8-5.4 MPA

Applications: heat suppling, chemical, food, textile, printing and dyeing, cigarettes and tobacco, fodder, pharmacy, building materials, brewery, rubber, hospital etc.

Fuel: Nature gas, coke oven gas, blast furnace gas, carbon black off-gas, biogas, methanol, etc.

Temperature: 450/485℃

DHS Conner Tube Gas-Fired Boiler


  Conner Tube Gas-Fired Boiler use a piping system as the frame of the whole boiler, which affords all loading of boiler, meanwhile this frame is used as falling pipe and upper/lower header. This boiler drum is external type, furnace is complete sealing membrane wall structure, convection heating surface is flag pipe. Corner tube boiler has many advantages such as compact structure, less steel material consumption and fast temperature rising speed, so it is widely used in many industries. This boiler is in bulk structure.


Safely water circulation:

  by using special water circulation system, drum is not heated, the heated water flow by single directions, when the power is shut off, water system will not be vaporized, so water circulating system is very safe.

Anti-knock structure:

  corner tube boiler is non-frame structure, its weight is afforded by membrane water call and falling pipes, and membrane water all is welded as one whole piece, it has good vibration resistance.

Complete sealing structure:

  The boiler body is all welded by the membrane water wall, it is complete sealing steel structure and avoid air leakage. The upper part of the boiler can be divided according to the railway transportation dimension requirement. The excess air coefficient at the tail part of the boiler is less than 1.2, which not only reduces the exhaust heat loss and the electric consumption of the induced fan, but also greatly reduces the environmental pollution of the boiler room.

  Light insulation material of furnace wall; The outer wall of the corner tube boiler adapt light insulation material, 200mm thick elastic special compound silicate plate and 40mm thick slurry cover, and then reinforced with metal plate instead of brick wall structure, the insulation effect is excellent.


DHS steam boiler parameters
  Model DHS35-3.82/450-Q
Rated evaporation capacity(t/h) 35 40 45 50 65 75
Rated working pressure(MPa) 3.8/5.3 3.8/5.3 3.8/5.3 3.8/5.3 3.8/5.3 3.8/5.3
Rated steam temperature(℃) 450/485 450/485 450/485 450/485 450/485 450/485
Feeding water temperature(℃) 104 104 104 104 104 104
Available fuel Nature gas, Biogas, coke oven gas, methanol, light oil, etc.
Fuel consumption Natural gas(Nm³/h) 2520 3600 4680 5400 7200 7920
Light oil(kg/h) 2170 3100 4030 4650 6200 6820
Thermal efficiency(%) >98 >98 >98 >98 >98 >98
 Any change of technical data shall not be advised additionally.

Please Feel free to give your inquiry in the form below

  • Name* :
  • E-mail* :
  • Country :
  • Tel :
  • Product :
  • Message* :

Now the message

Contact Us