Tel :+86-13506151306

Email:mayonghong@zozen.com

Home > Product

Gas/Oil Fired Fire Tube Boiler

Capacity: 0.5-20 t/h

Pressure: 0.7-2.5 Mpa

Applications: heat suppling, chemical, food, textile, printing and dyeing, cigarettes and tobacco, fodder, pharmacy, building materials, brewery, rubber, hospital etc.

Fuel: nature gas, oil

Temperature: 194~204℃

Gas/Oil Fired Fire Tube Boiler

PERFORMANCE

  WNS gas-fired fire tube boiler, shell type, 3 passes wetback oil/gas fired boiler. After fuel is being atomized by burner, flame is full of the wave furnace and transfer heat via furnace wall, this is 1st pass; the high temperature smoke is collected in reversal chamber and then enters 2nd pass which is grooved tubes bundle area; after heat convection, air temperature gradually falls and goes to front smoke box and turn to 3rd pass, which is smooth tubes bundle area, and then enters chimney passing back smoke box and exhausted to the atmosphere.

Advantage:

Digitized manufacture

  The key part such as material cutting, rolling, drilling are proceeded by advanced CNC machining process to reduce the assemble stress and extend boiler working lifetime.

  The front and back smoke chamber plates are cut by CNC plasma cutting machine and looks tidy and beautiful;

Easy operation and maintenance

  Fully automatically operating, with automatically adjustment and protection of burning, water level, temperature and steam pressure

  longer working life.

  Smoke tube and tube sheet connection is expanded first to eliminate the gap between them, then adopt automatic argon arc welding to relief the stress and expand boilers working life.

  Longitudinal and girth joint adopt advanced automatic submerged-arc welding for good welding quality. All longitudinal and girth joint will have 100% radiographic inspection.

  Fin tube us ND steel or stainless-steel material which avoid low temperature corrosion.

  Inspection procedure point is set up to guarantee the sequence of expanding and welding, avoid cracking of the tube sheet holes

  less fuel consumption

  High quality aluminum silicate fiber is used with fire clay insulation, to control the boiler body temperature below 45℃ to control heat lost.

  Sufficient steam storage room and heating area makes boiler to generate high quality steam and high thermal power

  Condenser is added to reuse the waste heat of the exhausted smoke to increase feeding water’s temperature and reduce emission temperature, which can increase the thermal efficiency above 98% and save operating cost.

SPECIFICATIONS

 
Model WNS1-0.7-Y(Q)
WNS1-1.0-Y(Q)
WNS1.5-1.0-Y(Q) WNS1.5-1.25-Y(Q) WNS2-1.0-Y(Q) WNS2-1.25-Y(Q) WNS3-1.0-Y(Q)
WNS3-1.25-Y(Q)
WNS4-1.25-Y(Q)
 WNS4-1.6-Y(Q)
WNS5-1.25-Y(Q)
 WNS5-1.6-Y(Q)
Rated steam capacity(t/h) 1 1.5 2 3 4 5
Rated working pressure(Mpa) 0.7/1.0 1.0/1.25 1.0/1.25 1.0/1.25 1.25/1.6 1.25/1.6
Rated steam temperature(℃) 170/184 184/194 184/194 184/194 194/204 194/204
Feeding water temperature(℃) 20 20 20 20 20 20
Heating area(㎡) Body 24.06 27.33 58.15 89.99 112.59 163.1
Condenser 15.4 20.5 29.64 45.6 53.54 65.89
Thermal efficiency(%) >98 >98 >98 >98 >98 >98
Fuel  Nature gas, coke oven gas, biogas, methanol, light oil etc.
Combustion equipment burner
General power (KW) 3.6 4 .8 7.0 10.5 13 16.5
Feed pump model JGGC2-8×16 JGGC2-8×16 JGGC2.4-8×18 JGGC4-8×18 JGGC4.8-8×22 JGGC6-8×18
consumption Light oil 66 99 113 196 266 332
nature gas 72 108 144 216 288 360
Max part weight 4 4.5 8.5 8.9 13.3 14.3
Max dimension of delivery
(m)(L×W×H)
3.25×1.8×2.1 3.0×1.8×2.01 4.4×2.1×2.46 4.6×2.31×2.62 4.7×2.48×2.85 5.33×2.65×3.3
 
 Any change of technical data shall not be advised additionally.

Please Feel free to give your inquiry in the form below

  • Name* :
  • E-mail* :
  • Country :
  • Tel :
  • Product :
  • Message* :

Now the message

Contact Us
Tel:+86-13506151306
After-sale:400-118-7088
Fax:0510-68991001
Email:mayonghong@zozen.com